AX4S

Digital Transmission Range (TR) Sensor

Special Tools:

Special Tool(s)

Removal
1. Set the parking brake.
2. Place the transaxle range selector lever in NEUTRAL.
3. Disconnect the battery ground cable.
4. Remove the engine air cleaner assembly.





5. Disconnect the connector.





6. Disconnect the shift cable.





7. Remove the manual control lever.





8. Remove the digital transmission range (TR) sensor.

Installation
1. Verify that the transaxle range selector lever is in NEUTRAL.





2. Install the digital TR sensor and loosely install the bolts.





3. Using the special tool, align the digital TR sensor.





4. Install the manual control lever and nut.





5. Connect the shift cable.
6. Verify that the shift cable is correctly adjusted.





7. Connect connector.
8. Install the engine air cleaner assembly.
9. Connect the battery ground cable.
10. Check for correct vehicle operation.