Crankshaft Main Bearing: Specifications
| Crankshaft main bearing cap stud bolt | 59 ft.lbs. | ||
| Main bearing thrust face | Surface finish (RMS) | 0.4 micrometers | |
| Runout limit | 0.001 inch | ||
| Main bearings | Clearance to crankshaft | Desired | 0.001-0.0014 inch |
| Allowable | 0.0005-0.0023 inch | ||
| Bearing wall thickness | 0.0962-0.0976 inch 1st and 2nd 0.0980-0.0955 inch 3rd and Rear | ||
| Main bearing bore diameter | 2.713 inch @ 2.712 in. |