| Connecting rod journal | Diameter | | 2.1253-2.1261 inch |
| Out-of-round limit | | 0.0003 inch MAX @ 0.0006 in Total |
| Taper limit | | 0.0003 in per inch |
| Surface limit (RMS) | | 0.25 micrometers |
| Connecting rod, piston and rings | Connecting rod | Piston pin bore diameter | 0.9096-0.9112 inch |
| | Crankshaft bearing bore diameter | 2.250-2.251 inch |
| | Length (center-to-center) | 5.530-5.533 inch |
| Alignment (bore-to-bore max. diff.) | Twist | | 0.003 per inch |
| Bend | | 0.0016 per inch |
| Side clearance (assembled to crank) | Standard | | 0.006-0.014 inch |
| Service limit | | 0.014 in MAX |