Radiator Hose: Service and Repair

Radiator Hose-Tube Assembly

Removal and Installation
1. Raise and support vehicle.
2. Remove the front splash shield.
3. Drain the cooling system.





4. Remove the lower radiator hose, reservoir supply hose, and the radiator lower tube bolt.
5. Lower the vehicle.





6. Remove the radiator upper tube bolt, and disconnect the radiator vent tube.





7. Disconnect the upper radiator hose and engine vent hose.





8. Release the tabs on the power distribution box and position aside.





9. Disconnect the oxygen sensor connector retainer and harness pin-type retainer.





10. Remove the two bolts, and remove the radiator tube assembly.
11. To install, reverse the removal procedure.