Connecting Rod, Engine
| Piston pin bore diameter | 0.827-0.828 in. | |
| Crankshaft bearing bore diameter | 2.0872-2.0879 in. | |
| Length Center-to-Center | 5.435-5.38 in. | |
| Alignment (bore-to-bore max diff.)e Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | Twist | 0.0019 per 0.984 inch |
| Bend | 0.0014 per 0.984 inch | |
| Side clearance (assembled to crank) | Standard | 0.0039-0.0118 inch |
| Service limit | 0.0137 inch MAX |