Shift Solenoid Failure Mode Chart "Always Off"

Shift Solenoid Failure Mode Chart "Always OFF"





Failed OFF due to PCM and/or vehicle wiring concerns, and/or solenoid electrically stuck off, and/or hydraulically or mechanically stuck off.





a OVERDRIVE canceled.
b When a manual pull-in occurs above a calibrated speed the transaxle will not downshift from the higher gear until the vehicle speed drops below this calibrated speed.





a OVERDRIVE canceled.
b When a manual pull-in occurs above a calibrated speed the transaxle will not downshift from the higher gear until the vehicle speed drops below this calibrated speed.
c No forward movement.