Switch State Control

NOTE:
^ The Spare Key Programming Switch is an NGS/SBDS programmable switch which provides the capability to enable/disable the normal customer Spare Key Programming Procedure detailed in the Owner's Manual (customer can program a spare ignition key by cycling two programmed ignition keys and then cycling the new key). This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the Spare Key Programming procedure available to the vehicle driver.
^ The spare key programming switch state can be viewed by PATS PID SPAREKY.

1. Insert a programmed ignition key into the ignition lock cylinder and turn the ignition switch from the OFF position to the RUN position.
2. Enter NGS/SBDS using the Ford Service Function (FSF) card. Select PCM from the menu. Follow Security Access to obtain security access.
3. From NGS/SBDS menu: Toggle SPARE KEY PROGRAMMING SWITCH selection to desired setting.

ENABLE Spare Key Programming Procedure is accessible.

DISABLE Spare Key Programming Procedure is not accessible.

NOTE: The default setting on delivery of all new vehicles is ENABLE.