Rear

Brake Disc

Removal
1. Loosen the wheel nuts.
2. Raise and support the vehicle.
3. Remove the wheel.





4. Disconnect the parking brake cable.
1 Pull back the parking brake lever.
2 Disconnect the cable from the lever.
3 Detach the conduit retaining clip.
4 Detach the cable and conduit.





5. Detach the caliper and anchor plate assembly.
^ Secure the caliper and anchor plate assembly out of the way to prevent damage to the brake hose.





6. Remove the brake disc.
^ Remove the retainers (if equipped).

Installation








1. Install the brake disc.
^ Install the retainers (if equipped).








2. Install the parking brake cable.
1 Install the cable and conduit.
2 Secure the cable retaining clip.
3 Pull back the parking brake lever.
4 Install the cable to the parking brake lever.