Apply Components

Apply Components
Band-Overdrive
The overdrive band holds the front planetary sun gear stationary in fourth gear (overdrive).

Band Coast
The coast band allows the transaxle case to hold the rear planetary sun gear stationary. The coast band is applied in second and manual first gears.

Clutches-Direct
The direct clutch cylinder connects the driven sprocket to the outer race of the direct one-way clutch.

Clutches-Forward
The forward clutch locks the driven sprocket and the low one-way clutch.

Clutches-Intermediate
The intermediate clutch connects the driven sprocket to the front planetary carrier and rear planetary ring gear in second and third gears.

Clutches-Reverse
The reverse clutch holds the front planetary gear set and the rear ring gear of the rear planetary gear set stationary in reverse gear.

Clutches-Low-Intermediate
The low-intermediate clutch connects the transaxle case of the outer race of the low-intermediate one-way clutch in manual low, first and second gears.

One-Way Clutch-Low~Intermediate
The low-intermediate one-way clutch connects the low-intermediate clutch to the rear planetary sun gear. The low-intermediate one-way clutch transmits torque during drive operation in first and second gear, as well as manual second and manual first gears.

One-Way Clutch-Low
The low one-way clutch transmits torque from the driven sprocket to the sun gear of the front planetary gear set in first gear.

One-Way Clutch-Direct
The direct one-way clutch transmits torque from the driven sprocket to the front planetary sun gear in third gear and provides engine braking in manual low in connection with the direct clutch.