Module Communications Network

1. Verify the customer concern by operating the system in question.
2. Visually inspect for obvious signs of electrical damage.

VISUAL INSPECTION CHART

Electrical
^ Central Junction Box (CJB) Fuse 216 (15A)
^ Damaged wiring harness
^ Loose or corroded connections
^ Generic Electronic Module (GEM)
^ Data Link Connector (DLC)

3. If the concern remains after the inspection, connect the scan tool to the Data Link Connector (DLC) located beneath the instrument panel and select the vehicle to be tested from the scan tool menu. If the scan tool does not communicate with the vehicle:
^ Check that the program card is correctly installed.
^ Cheek the connections to the vehicle.
^ Check the ignition switch position.

If the scan tool still does not communicate with the vehicle, go to Pinpoint Test H. Test H: No Module/Network Communication
4. Go to Pinpoint Test PC. Pinpoint Test PC (Precheck)