Cable and Conduit - LH Rear

Removal and Installation
All vehicles
1. Remove the left rear wheel and tire assembly.





2. NOTE: While holding the rod, turn the adjustment nut.

Slacken the parking brake cable.





3. Disconnect the LH rear parking brake cable and conduit.





4. Squeeze the retainer and pull the cable and conduit out of the body bracket.

Vehicles with drum brakes
5. Remove the brake drum.





6. Disconnect the parking brake cable.

7. NOTE: It is necessary to remove only the primary (front) brake shoe.

Remove the primary brake shoe.





8. Squeeze the retainer and pull the parking brake cable and conduit out of the brake backing plate.





Vehicles with disc brakes
9. Disconnect the parking brake cable and conduit.
1 Disconnect the cable.
2 Remove the E-clip and pull the cable and conduit out of the brake caliper.





10. Remove the bolt and the cable and conduit.

All vehicles
11. To install, reverse the removal procedure.
^ Make sure the retainers are locked securely in place.
12. Carry out the Parking Brake Cable Adjustment.