4F50N

Digital Transmission Range (TR) Sensor

Special Tools:

Special Tool(s)

Removal





1. Place the transaxle range selector lever in NEUTRAL.
2. Disconnect the battery ground cable.





3. Disconnect the mass air flow (MAF) sensor and the breather tubes.





4. Remove the engine air cleaner.





5. Remove the air filter assembly.





6. Disconnect the connector.





7. Remove the manual control lever and cable.
1. Remove the nut.
2. Remove the manual control lever and cable.





8. Remove the digital TR sensor.

Installation
1. Verify that the shift selector lever is in NEUTRAL.





2. Install the digital TR sensor and loosely install the bolts.





3. Using the special tool align the digital TR sensor and tighten the bolts.





4. Connect the connector.





5. Install the manual control lever cable and nut.
1. Install the cable into the bracket
2. Tighten the nut.





6. Install the air filter assembly.





7. Install the engine air cleaner.





8. Reconnect the mass air flow (MAP) sensor and the breather tubes.
9. Connect the battery ground cable.
10. Check for correct vehicle operation.