Lifter / Lash Adjuster: Service and Repair

Removal and Installation
1. Remove the camshaft followers.





2. NOTE: Mark the position of the hydraulic lash adjuster to make sure they are assembled in their original position.

Remove the hydraulic lash adjusters.

3. NOTE: Inspect the hydraulic lash adjusters and install new lash adjusters as necessary.

To install, reverse the removal procedure.
- Lubricate the hydraulic lash adjusters with Super Premium SAE 5W-20 Motor Oil XO-5W20-QSP or equivalent, meeting Ford specification WSS-M2C153-H.