| Camshaft | Lobe Lift | Intake | Primary | 4.79 mm |
| | | Secondary | 4.79 mm |
| | Exhaust | | 4.79 mm |
| Allowable Lobe Lift Loss | | | 0.0 mm |
| Theoretical Valve Lift @ 0 Lash | Intake | Primary | 9.80 Millimeter (mm) |
| | | Secondary | 9.80 Millimeter (mm) |
| | Exhaust | | 9.80 Millimeter (mm) |
| End Play | | Service Limit | 0.190 Millimeter (mm) |
| Journal To Bearing | Clearance | Standard | 0.025 - 0.076 Millimeter (mm) |
| | | Service Limit | 0.121 Millimeter (mm) |
| Journal Diameter | All | | 26.962 - 26.936 Millimeter (mm) |
| Journal Inside Diameter | | Cap Assembled | 27.012 - 26.987 mm |
| Bearing Inside Diameter | All | | 27.012 - 26.987 mm |
| Camshaft Cap | | Bolt | 10 Newton Meter (Nm) |
| Position Sensor | | Bolt | 10 Newton Meter (Nm) |
| Oil Seal | | Retainer | 10 Newton Meter (Nm) |