Demonstration/Deliver Hold - Attachment III

RCM REMOVAL AND REPLACEMENT:

For removal and replacement of the Restraint Control Module (RCM) follow the instructions in the 2001

Workshop Manual Information Section 501-20B: OCCUPANT RESTRAINTS

AIRBAG FUSE REMOVAL AND REPLACEMENT

DEALER STOCK UNITS ON HOLD:





Remove RCM fuse (THIS WILL ACTIVATE AIRBAG LIGHT) and tape the fuse to the inside of the windshield (This prevents the fuse from getting lost and acts as a reminder to install the fuse after the revised RCM has been replaced). Here are the fuse locations:

WARNING
BE SURE TO REINSTALL THE FUSE AFTER REPLACING THE RCM.

RCM PART NUMBER INSPECTION (LIMO ONLY)

Limousines may have a Limo Kit installed. Limo Kits have good RCM units.

Inspection Procedure:

1. Remove ashtray.

2. Using a flashlight, look through the ash tray opening and read the RCM part number:

a. Replace RCM if part number is 1W1A-14B321-BA

b. If part number is anything other than 1W1A-14B321-BA install ash tray and return the vehicle to customer.