Clutch Pedal Adjustment

Clutch Pedal Adjustment





1. Determine the clutch pedal travel.
1. Turn the steering wheel from the straight-ahead position approximately 30 degrees to the left.
2. Attach cable ties to clutch pedal (second groove from the bottom) and tighten. Install a steel rule with cable ties and pass through the steering wheel.
3. Read the measurement, depress clutch pedal as far as the stop and read the measurement again.





2. NOTE: Pedal travel should not be restricted by mats or the clutch master cylinder.

Adjust the clutch pedal travel.
^ Dimension 130 ± 5 mm.
^ The travel may be adjusted to 130 ± 5 mm at the pedal stop screw.