Lower Arm - Rear

Removal
1. Loosen the wheel nuts.
2. Raise and support the vehicle.
3. Remove the wheel.





4. Mark the position of the cam bolt washer on the crossmember.





5. Detach the rear arm from the wheel spindle.





6. Remove the rear arm from the crossmember.
1. Remove the nut and bolt.
2. Remove the arm.

Installation





1. Install the cam bolt, washer and nut finger tight.
1. Position the rear lateral arm.
2. Install the cam bolt, washer and nut finger tight.





2. Align the marks.





3. NOTE: The final tightening of the rear suspension components must be carried out with the vehicle on its wheels.

Secure the rear arm to the crossmember.





4. Install the rear arm to the wheel spindle.





5. Install the wheel.
6. Check the toe setting and adjust as necessary.