Connecting Rod
| Piston pin bore diameter | 21.071-21.032 mm |
| Length (center to center) | 138.06-138.4 mm |
| Alignment (Bore to bore max difference) | --- Pin bore and crankshaft bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of centerline. |
| Twist | 0.050 mm per 25 mm |
| Bend | 0.038 mm per 25 mm |
| Side clearance (assembled to crank) Side clearance (assembled to crank) - Standard | |
| Side clearance (assembled to crank) Side clearance (assembled to crank) - Service Limit |