Component Tests and General Diagnostics

Diagram 417-01-00-3:

Leftthand Turn/Hazard Lamp

Diagram 417-01-00-4:

Righthand Turn/Hazard Lamp
The turn signal lamps and hazard warning lamps system consists of the following components:
^ Turn signal/high-low beam switch.
^ Turn signal relay.
^ Turn signal lamps.
^ Turn signal indicator.
^ Wiring.
^ Fuse.

The turn signal relay is supplied with a voltage through turn signal/high-low beam switch. There is a fuse for the turn signal/high-low beam switch in both the BJB and the CJB.

If the turn signal/high-low beam lamp switch is switched downwards, then the left-hand turn signal lamps are supplied with a voltage through the turn signal relay. If the turn signal/high-low beam lamp switch is switched upwards, then the right-hand turn signal lamps are supplied with a voltage through the turn signal relay.