Valve Cover: Service and Repair

Valve Cover

Removal





1. Disconnect the oil feed sensor electrical connector.





2. Disconnect the crankcase ventilation tube.





3. Remove the appearance cover.
1 Position the throttle cable out of the way, and the speed control cable (if equipped).
2 Remove the eight bolts.
3 Remove the appearance cover.





4. Remove the spark plug wires.





5. Detach the upper part of the engine front cover out of the way.
1 Remove the four bolts.
2 Position the front cover to one side.





6. Remove the valve cover.
1 Position the throttle cable to one side, and the speed control cable (if equipped).
2 Remove the nine bolts.
3 Remove the valve cover.

Installation











1. To install, reverse the removal procedure.