Front Door Window Glass: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.

NOTE: Make sure the window is fully closed.

2. Remove the door trim panel.







3. Detach the watershield.
^ Using a plastic knife (disposable cutlery), cut through the Butyl strip to enable the watershield to be peeled back.

CAUTION: Do not touch the adhesive surface as re-bonding will be impaired.







4. Detach the window glass.
1. Loosen the front clamp bolt
2. Remove the rear clamp bolt.







5. Remove the window glass.

INSTALLATION







1. To install, reverse the removal procedure.