Attachment II - Labor and Parts Information

LABOR ALLOWANCES

PARTS REQUIREMENTS

No parts are required for this recall.

NOTE:
In some of the affected vehicles the left outboard accelerator pedal bracket anchor nut was intentionally not installed during the assembly process. It does not affect pedal operation. It is not necessary to install the missing nut when checking or adjusting the pedal lateral spacing or when replacing a pedal assembly.

ROTUNDA SPECIAL TOOL REQUIREMENTS

Rotunda Special Tool OTC 206-088 is utilized in this recall during inspection and pedal adjustment.

The special tool serves two (2) functions: One end of the tool performs a "checking" function (for inspection) between the brake and accelerator pedal. The other end of the tool performs a "setting" function (for pedal adjustment) between the two pedals.

Rotunda Special Tool OTC 206-088 has been shipped to the dealership (quantity of 2 tools per dealer). It is expected that tools will arrive at the dealership the week of October 20, 2002. Additional tools may be ordered at no-charge by calling the Special Service Support Center.