Front Door Window Regulator: Service and Repair

Front Door Window Regulator and Motor

Heavy Duty Riveter:

SPECIAL SERVICE TOOL(S)


REMOVAL
1. Remove the front door window glass. For additional information, refer to Front Door Window Glass.
2. Disconnect the front door window regulator motor electrical connector.







3. Remove the window regulator rivets.
4. Remove the front door window regulator.







5. Remove the bolts and the window regulator motor.

WARNING: IF THE FRONT DOOR POWER WINDOW REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE FRONT DOOR POWER WINDOW REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: Use the special tool to install the rivets.