Inspection and Verification

1. Verify the customer concern by checking the air bag indicator in the instrument cluster.
2. Visually inspect for obvious signs of mechanical and electrical damage using the following chart.

VISUAL INSPECTION CHART

Mechanical
^ Damaged Restraints Control Module (RCM) bracket
^ Damaged front crash sensor or bracket

Electrical
^ Blown fuse(s)
^ Damaged wiring harness
^ Loose or corroded connectors
^ Circuitry open/shorted
^ Damaged Shorting bars

3. If the concern is not visually evident, use the scan tool to retrieve Diagnostic Trouble Codes (DTCs) and carry out the on-demand self test.
4. If the on-demand self test is passed and no DTCs are retrieved, proceed to the symptom chart. Symptom Related Diagnostic Procedures
5. If DTCs are retrieved, refer to the Restraints Control Module (RCM) Diagnostic Trouble Code (DTC) Priority Table. Diagnostic Trouble Code (DTC) Priority Table (Start Here)