Removal and Replacement

REMOVAL

1. Disconnect the battery. For additional information, refer to Battery.

CAUTION:
- Prior to removal of modules, it is necessary to upload configuration information to scan tool. This information needs to be downloaded into the new module once installed. For additional information, refer to Module Communications Network ( Information Bus).
- Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.

2. Remove the instrument cluster finish panel. For additional information, refer to Dash Board.







3. Remove the instrument cluster screws.
- Disconnect the electrical connectors.

4. Remove the instrument cluster.

INSTALLATION
1. To install, reverse the removal procedure.

CAUTION: Once the new module is installed, it is necessary to download the module configuration information from the scan tool into the new module. For additional information, refer to Module Communications Network ( Information Bus).