2001 Escape Lower Intake Manifold Installation

1. Install the six (6) new fluorocarbon gaskets in the tower intake manifold assembly.





2. Install the lower intake manifold assembly and tighten the bolts in the sequence shown (Figure 3).

3. Connect the fuel injection supply manifold.

a. Connect the six (6) fuel injector electrical connectors (Figure 1 View A).

b. Connect the fuel pressure damper vacuum line (Figure 1, View B).

4. Connect the fuel line spring lock coupling (Section 310-00).

5. Install the upper intake manifold (Section 303-01B).