Connecting Rod, Engine
| Piston Pin Bore Diameter | 0.827 - 0.828 Inch (in) | |
| Crankshaft Bearing Bore Diameter | 2.0872 - 2.0879 Inch (in) | |
| Length (Center-To-Center) | 5.435 - 5.38 Inch (in) | |
| Alignment (Bore-To-Bore Max. Diff.) Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | Twist | 0.0019 per 0.984 Inch (in) |
| Bend | 0.0014 per 0.984 Inch (in) | |
| Side Clearance (Assembled To Crank) | Standard | 0.0039 - 0.0118 Inch (in) |
| Service Limit | 0.0137 Inch (in) |