Inspection and Verification

1. Verify the customer concern by operating the system.
2. Visually inspect for obvious signs of mechanical and electrical damage.

VISUAL INSPECTION CHART

Mechanical
^ Loose webbing
^ Damaged/frayed webbing
^ Safety belt retractor and tongue assembly
^ Retractor
^ Buckle

Electrical
^ Warning indicator bulb
^ Circuit
^ Central timer module

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next stop.
4. If the concern is not visually evident, verify the symptom and refer to the Symptom Chart. Symptom Related Diagnostic Procedures