Front Backrest-With Power Seats

REMOVAL
1. Remove the front seat.







2. Detach the wiring harness.
1 Disconnect the harness from the three retaining clips on the seat base.
2 Disconnect the electrical connectors.







3. Remove the outer seat base trim.
1 Remove the retaining screws.
2 Release the front and rear retaining clips.







4. Remove the backrest adjuster assembly.
1 Remove the screw.
2 Remove the center cap.
3 Remove the adjuster assembly.







5. Remove the seat backrest.
^ Remove the two Torx retaining screws each side.

INSTALLATION







1. To install, reverse the removal procedure.