Sunroof / Moonroof: Adjustments

1. Position the roof opening panel surround.
1 Remove the screws.
2 Slide the surround into the stowage space above the headliner.







2. Adjust the rear edge of the roof opening panel.
1 Loosen the center and rear screws on each side.
2 Push the rear edge up/down to give the correct alignment (flush to + 1 mm).







3. Adjust the front edge of the roof opening panel.
1 Loosen the center and front screws on each side.
2 Push the front edge up/down to give the correct alignment (flush to - 1 mm).







4. Tighten the roof opening panel screws on each side.







5. Install the opening roof panel surround.
1 Slide the surround to the front of the sliding roof panel.
2 Install the screws.