Power Windows

REMOVAL
1. Remove the door trim panel.







2. Detach the door speaker.
^ Remove the speaker retaining screws.







3. Remove the door speaker.
^ Disconnect the multiplug.







4. Detach the watershield.
^ Using a plastic knife (disposable cutlery), cut through the Butyl strip to enable the watershield to be peeled back.

CAUTION: Do not touch the adhesive surface as re-bonding will be impaired.







5. Connect the window operating switch electrical connector.







6. Remove the window retaining bolts.

NOTE: Align the window retaining bolts with the access holes.







7. Remove the door interior weatherstrip.







8. Remove the glass.
1 Lift the glass.
2 Tip the glass forwards and remove the glass.

INSTALLATION







1. To Install, reverse the removal procedure