On-Board Diagnostics With Diagnostic Tool

NOTE: For detailed instructions and other diagnostic methods using the NGS, refer to the NGS instruction guide.

These tests can be used to diagnose the powertrain control module, sensors, and actuators of the CD4E transaxle.
The following is a guide for using the On-Board Diagnostic (OBD) Quick Tests and the New Generation STAR (NGS) Tester.
- Quick Test 1.0-Visual Inspection
- Quick Test 2.0-Set Up
- Quick Test 3.0-Key On, Engine Off
- Quick Test 4.0-Continuous Memory
- Quick Test 5.0-Key On, Engine Running
- Special Test Mode
- Wiggle Test Mode-Output Test Mode
- PCM Reset Mode
- Clearing DTCs
- OBD 11 Drive Cycle
- Other NGS Features