With Manual Transaxle

Parking, Reversing and Side Lamps
^ The voltage for these lamps is supplied through the lamp switch.
^ The left and right-hand circuits are fused separately in the Central Junction Box (CJB).
^ The parking and side lights will work when the lamp switch is set to 'side lamps' or 'headlamps'.
^ The reversing lamps operate dependent on selection of reverse gear.

The reversing lamps system consists of:
^ Reversing lamps.
^ Reversing lamp switch.
^ Wiring.
^ Fuse.

The voltage supply to the reversing lamps is provided by the reversing lamp switch on vehicles equipped with a manual transaxle and by the transaxle range sensor on vehicles equipped with an automatic transaxle. There is a fuse for this circuit in the CJB.