| Connecting rod bearing clearance to crankshaft | | 0.020 - 0.065 Millimeter (mm) |
| Bearing wall thickness (STD) | | 1.476 - 1.488 Millimeter (mm) |
| Clearance of crankshaft W/O cylinder head | Desired | 0.0457 - 0.0660 Millimeter (mm) |
| Allowable | 0.0461-0.0859 Millimeter (mm) |
| Clearance of crankshaft w/cylinder head | Desired | 0.0279 - 0.0483 Millimeter (mm) |
| Allowable | 0.0276-0.0674 Millimeter (mm) |
| Bearing wall thickness | | 2.117 - 2.129 Millimeter (mm) |
| Connecting rod piston pin bore diameter | | 20.570 - 20.610 Millimeter (mm) |
| Crankshaft bearing bore diameter | | 46.89 - 46.91 Millimeter (mm) |
| Out-of-round limit piston pin bore | | 0.008 Millimeter (mm) |
| Taper limit piston pin bore | | 0.0038/25.4 Millimeter (mm) |
| Length (center to center) | | 131.905 - 131.975 Millimeter (mm) |
| Out-of-round limit-bearing bore | | 0.010 Millimeter (mm) |
| Taper limit-bearing bore | | 0.010 Millimeter (mm) |
| Alignment bore to bore (max differential) twist | | 0.05 Millimeter (mm) |
| Bend | | 0.038 Millimeter (mm) |
| Side clearance (assembled to crank) Std. mm (service limit mm) | | 0.092 - 0.268 (0.356) Millimeter (mm) |
| Bore diameter, large end | | 49.89 - 49.91 Millimeter (mm) |
| Bore diameter, small end | | 19.951 - 19.981 Millimeter (mm) |
| Inside dia. - large end bearing shells (fitted | | 46.926 - 46.960 Millimeter (mm) |
| Large end bearing radial clearance | | 0.016 - 0.070 Millimeter (mm) |
| Large end bearing axial clearance | | 0.090 - 0.320 Millimeter (mm) |