Spare Key Programming

NOTE:
^ The Spare Key Programming Switch is an NGS or SBDS programmable switch which provides the capability to enable/disable the normal customer Spare Key Programming Procedure detailed in the Owner's Guide. This switch is provided as a security measure for rental company fleets or other fleet purchasers who may not want the Spare Key Programming procedure available to the vehicle driver.
^ The spare key programming switch state can be viewed by PATS PID SPARE_KY

1. Insert a programmed ignition key into the ignition lock cylinder and turn the ignition switch from the OFF position to the RUN position.
2. Connect the NGS or SBDS tester using the ford service function card. Obtain security access. For additional information, refer to the procedure: Security Access
3. From NGS/SBDS menu: Toggle SPARE KEY PROGRAMMING SWITCH selection to required setting.