Clutch Pedal Adjustment

1. Determine the clutch pedal travel.





1 Turn the steering wheel from the straight ahead position approximately 30 degrees to the left.
2 Attach cable ties to clutch pedal (second groove from the bottom) and tighten. Install a steel rule with cable ties and pass through the steering wheel.
3 Read the measurement, depress clutch pedal as far as the stop and read the measurement again.

2. NOTE: Pedal travel should not be restricted by mats or the clutch master cylinder.





Adjust the clutch pedal travel.
- Dimension 130 ± 5 mm.
- The travel may be adjusted to 130 ± 5 mm at the pedal stop screw.