System Specifications

GENERAL TORQUE SPECIFICATIONS

2.0L Torque Specifications (1 Of 5):

2.0L Torque Specifications (2 Of 5):

2.0L Torque Specifications (3 Of 5):

2.0L Torque Specifications (4 Of 5):

2.0L Torque Specifications (5 Of 5):

CYLINDER HEAD TIGHTENING SPECIFICATIONS

Caution: The cylinder head bolts must NOT be tightened more than once.






Install the bolts in the sequence shown in three stages:

^ Stage 1: Tighten bolt 1 through 10 to 20 Nm.
^ Stage 2: Tighten bolt 1 through 10 to 40 Nm.
^ Stage 3: Tighten bolt 1 through 10 to 90 degrees.