| Main Bearing Journal Diameter | | 57.98 - 58.0 Millimeter (mm) |
| Taper Limit | | 0.008 Per 25.4 Millimeter (mm) |
| Journal Runout Limit | | 0.05 Millimeter (mm) |
| Runout Of Bearings 2, 3, And 4 Crankshaft End Play | | 0.100 - 0.300 Millimeter (mm) |
| Surface Finish (RMS) Micro | | 0.3 Millimeter (mm) |
| Clearance To Crankshaft | | 0.020 - 0.065 Millimeter (mm) |
| Thrust Bearing Journal Length | | 28.825 - 28.854 |
| Connecting Rod Journal Diameter | | 43.89 - 43.91 Millimeter (mm) |
| Out Of Round Limit | | 0.008 Millimeter (mm) |
| Taper Limit | | 0.008 Per 25.4 Millimeter (mm) |
| Surface Limit (RMS) Micro | Rear | 0.6 Millimeter (mm) |
| Front | 0.9 Millimeter (mm) |
| Main Bearing Thrust Face Surface Finish (RMS) Micro | | 0.6 Millimeter (mm) |
| Rear Micro | | 0.9 Millimeter (mm) |
| Front Runout Limit (T.I.R.) | | 0.025 Millimeter (mm) |
| Crankshaft End Play | | 0.100 - 0.300 Millimeter (mm) |
| Main Bearing Journal End Float | | 0.09 - 0.26 Millimeter (mm) |
| Big-End Bearing Journal Dia. | | 46.89 - 46.91 Millimeter (mm) |