Valve Cover: Service and Repair

Removal





1. Disconnect the oil feed sensor electrical connector.





2. Disconnect the crankcase ventilation tube.





3. Remove the appearance cover.
1. Position the throttle cable out of the way, and the speed control cable (if equipped).
2. Remove the eight bolts.
3. Remove the appearance cover.





4. Remove the spark plug wires.





5. Detach the upper part of the engine front cover out of the way.
1. Remove the four bolts.
2. Position the front cover to one side.





6. Remove the valve cover.
1. Position the throttle cable to one side, and the speed control cable (if equipped).
2. Remove the nine bolts.
3. Remove the valve cover.

Installation











1. To install, reverse the removal procedure.