Shift Linkage: Service and Repair

Removal
1. Raise and support the vehicle.





2. Remove the heat shield front (RH) bolt.





3. Remove the heat shield middle (RH) bolt.





4. Remove the heat shield middle (LH) bolt.





5. Remove the heat shield rear bolt.





6. Remove the transmission gearshift rod-to-shift lever nut.





7. Remove the transmission gearshift lever clamp bolt and the transmission gearshift rod and clevis.





8. Remove the transmission gearshift rod nut.





9. Remove the transmission gearshift bolt from the input shift shaft and remove the transmission gearshift rod and clevis.

Installation




















1. To install, reverse the removal procedure.