Crankcase Ventilation Hose

Crankcase Ventilation Connector And Hose:

REMOVAL
1. Disconnect crankcase ventilation hose or crankcase vent connector and hose (depending upon application) from upper intake manifold vacuum fitting.
2. Remove crankcase ventilation hose or crankcase vent connector and hose (depending upon application) and Positive Crankcase Ventilation valve (PCV valve)as an assembly.
3. Remove positive crankcase ventilation valve from crankcase ventilation hose or crankcase vent connector and hose (depending upon application.

INSTALLATION
1. Follow removal procedure in reverse order.