Fuel Vapor Control Valve (Inline)

REMOVAL
1. Raise and support the vehicle.
2. Drain and lower the fuel tank.
3. Disconnect the bracket and remove the fuel vapor control valve from the fuel tank.
4. Lift directly upward to release the fuel vapor vent valves and remove the fuel vapor control valve tube assembly.
5. Remove the rubber grommets from the fuel tank.

INSTALLATION
1. Follow the removal procedure in reverse order.
2. Perform the leak test procedure. EVAP System Leak Test
3. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle Test.