Inspection and Verification (Start Testing Here)

1. Verify the customer's concern by operating the headlamps to duplicate the condition.
2. Inspect to determine if one of the electrical concerns apply:

VISUAL INSPECTION CHART

Electrical
- circuitry open/shorted.
- connectors damaged.
- Headlamp bulb burned out.
- Damaged headlamp switch.
- Damaged dimmer switch (part of multi-function switch).
- Power distribution box Fuse 22 (30 A)
- Fuse junction panel Fuse:
^ 3 (10 A)
^ 4 (10 A)
^ 30 (15 A)

3. If the inspection reveals obvious concern(s) that can be readily identified, service as required.
4. If the concern(s) remains after the inspection, determine the symptom(s) and go to the Symptom Chart. Symptom Chart(s)