Spare Key Programming Switch
NOTE:- The Spare key Programming Switch is a New Generation STAR Tester (NGS/SBDS) programmable switch which provides the capability to enable/disable the normal customer Spare Key Programming Procedure. This procedure is in the Owner's Manual Spare Key Programming Procedure or under Key Programming - Program a Key Using Two Programmed Keys. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the Spare Key Programming procedure available to the vehicle driver.
- The spare key programming switch state can be viewed by PATS PID SPAREKY.
1. Insert a programmed ignition key into the ignition lock cylinder and turn ignition switch from OFF to RUN.
2. Enter new configuration function card/SBDS. Follow the Security Access Procedure to obtain security access.
3. From NGS/SBDS menu: Toggle SPARE KEY PROGRAMMING SWITCH to desired setting:
NOTE: The default setting on delivery of all new vehicles is