Removal and Installation

Removal
1. Raise the vehicle.
2. Remove the heat shield.





3. Disconnect the selector lever assembly.
1. Disconnect the selector cable adjusting cap.
2. Disconnect the selector cable.
3. Remove the nuts.
4. Lower the vehicle.





5. Remove the selector lever assembly.
1. Remove the cover.
2. Lift out the selector lever assembly.
3. Disconnect the selector lever electrical connector.


Installation





1. Install the selector lever assembly.
1. Reconnect the selector lever electrical connector.
2. Position the selector lever.
3. Install the cover.
2. Raise the vehicle.





3. Install the selector lever assembly.
1. Install the nuts.

NOTE: Do not lock the selector cable adjusting cap.

2. Connect the selector cable.
4. Lower the vehicle.
5. Adjust the cable and selector lever.