| Main Bearing Journal | Diameter | 57.98-58.0 |
| Out Of Round Limit | 0.008 |
| Taper Limit | 0.013 |
| Journal Runout Limit | 0.05 |
| Runout Of Bearings 2, 3, and 4 Crankshaft End Play | | 0.100-0.300 |
| Surface Finish (RMS) Micro | | 0.3 |
| Clearance To Crankshaft | | 0.020-0.065 |
| Thrust Bearing Journal Length | | 28.825-28.854 |
| Connecting Rod Journal | Diameter | 43.89-43.91 |
| Out Of Round Limit | 0.008 |
| Taper Limit | 0.008 Per 25.4 |
| Surface Limit (RMS) Micro | Rear | 0.6 |
| Front | 0.9 |
| Main Bearing Thrust Face Surface Finish (RMS) Micro | | 0.6 |
| Rear Micro | | 0.9 |
| Front Runout Limit | | 0.025 |
| Crankshaft End Play | | 0.100-0.300 |
| Main Bearing Bolts | Stage 1 | 25 |
| Stage 2 | 60 Degrees |