| Connecting Rod Bearings Clearance to Crankshaft | | | 0.020-0.065 |
| Bearing Wall Thickness (STD) | | | 1.476-1.488 |
| Clearance Of Crankshaft | W/O Cylinder Head | Desired | 0.0457-0.0660 |
| | Allowable | 0.0461-0.0859 |
| W/ Cylinder Head | Desired | 0.0279-0.0483 |
| | Allowable | 0.0276-0.0674 |
| Bearing Wall Thickness | | 2.117-2.129 |
| Connecting Rod Piston Pin Bore | Diameter | | 20.570-20.610 |
| Out Of Round | Limit | 0.008 |
| Taper | Limit | 0.0038/25.4 |
| Crankshaft Bearing Bore Diameter | | | 46.89-46.91 |
| Length (Center to Center) | | | 131.905-131.975 |
| Out-Of-Round | Bearing Bore | | 0.010 |
| Taper Limit | Bearing Bore | | 0.010 |
| Alignment Bore To Bore (Max Differential) | Twist | | 0.05 |
| Bend | | 0.038 |
| Side Clearance (Assembled To Crank) | STD | | 0.092-0.268 |
| Service Limit | | 0.356 |
| Connecting Rod Bearing Bolts | Stage 1 | | 25 |
| Stage 2 | | 90 Degrees |