Camshaft, Engine
| Camshaft Bore Inside Diameter | 45.796-45.821 | |
| Lobe Lift | Intake | 6.23 |
| Exhaust | 6.23 | |
| Allowable Lobe Lift Loss | 0.127 | |
| Theoretical Valve Maximum Lift | Intake | 10.28 |
| Exhaust | 10.28 | |
| End Play | Standard | 0.02-0.20 |
| Service Limit | 0.20 | |
| Journal To Cylinder Head Bearing Surface Clearance | 0.0335-0.0835 | |
| Journal Diameter Standard | Runout Limit | 0.127 Runout of center bearing relative to bearing nos. 1 and 5 |
| Out-of-Round | 0.08 | |
| Camshaft Drive Assembled Gear Face Runout | Crankshaft | 0.65 |
| Camshaft | 0.275 | |
| Camshaft Bearing Cap Bolts | 11 | |
| Intake Camshaft Timing Pulley | 50 | |
| Exhaust Camshaft Timing Pulley | Stage 1 | 44 |
| Stage 2 | 89 | |
| Exhaust Camshaft Timing Pulley Blanking Plug | 27 |