Rear Seat, Center

REMOVAL







1. Detach the lower safety belt anchor.
- Use a screwdriver to release the buckle.







2. Remove the trim cover.
1 Detach the clips on the front edge.
2 Slide the cover towards the front of the vehicle to disengage the rear retainers.







3. Fold the rear seat backrest forwards.
1 Pull the seat back release in the luggage compartment.
2 Lower the seat backrest.







4. Detach the retractor.
- Remove the Torx(r) retaining bolt.







5. Remove the center rear safety belt assembly.
- Detach the retractor from its keyed mounting.







INSTALLATION
1. To install, reverse the removal procedure.


CAUTION: When installing the center rear safety belt retractor; make sure the locating keys are correctly located. Failure to follow this caution may cause incorrect retractor operation.