With Manufacturer's Scan Tool (NGS Tester)

The Quick Tests are in the Powertrain Management. These tests can be used to diagnose the Powertrain control module, sensors, and actuators of the CD4E transaxle.

The following is a guide for using the On-Board Diagnostic (OBD) Quick Tests and the New Generation STAR (NGS) Tester.
- Quick Test 1.0 - Visual Inspection
- Quick Test 2.0 - Set Up
- Quick Test 3.0 - Key ON, Engine OFF
- Quick Test 4.0 - Continuous Memory
- Quick Test 5.0 - Key ON, Engine Running
- Special Test Mode
- Wiggle Test Mode - Output Test Mode
- PCM Reset Mode
- Clearing DTCs
- OBD II Drive Cycle
- Other NGS Features

Other NGS Features
Other diagnostic methods include the following:
- Parameter Identification (PID) access mode, used to monitor sensors and actuators.
- Freeze frame data access mode, used to view emission related data values from specific PIDs.
- Oxygen sensor monitor mode, used to monitor the O2 sensor.